March 2017

Microworks launches its first off-the-shelf product: Central stops for x-ray imaging

X-Ray microscopes, like optical microscopes, use lenses to focus light. When using Fresnel lenses, some of the transmitted x-rays are not focused. To block such x-rays, a central stop is usually implemented into the setup.

Together with researchers at the Paul Scherrer Institute (PSI) in Switzerland, microworks has developed a set of central stops with a range of diameters from 10µm to 160µm. The stops consist of circular gold pillars attached to 3 µm thin gold fins without any substrate. The rate of absorption is very high, as the gold height of fins and pillar is 80µm. PSI researchers tested the central stops at Beamline ID21 of the European Synchrotron Radiation Facility (ESRF) in France with great success. This was made possible through the highly precise x-ray LIGA technique. “Further x-ray optical elements such as order-sorting apertures will also be available as off-the-shelf products within the next few months”, says Dr. Joachim Schulz, managing director of microworks.

BACK